How to lay tiles

　　 When it comes to tiles, you can always pile up a lot of knowledge. From buying tiles to how to lay tiles, there are a lot of particularities. If you don’t have a good understanding of this, it’s easy to stale. Xiaobian will come to simple science popularization, I hope it can help you!

　　1. Firstly, fully soak the tiles

　　Before laying the tiles, you must fully clean the dirt on the tiles, and then soak them in clean water. The soaking time should be at least 2 hours. This is to make the tiles fully absorb moisture, so that the tiles will not absorb the moisture in the material when they are laid, and will not cause the material to be weakly pasted due to loss of water, resulting in falling off and hollowing.

　　2. Tiles need to set auxiliary lines

　　 After fully soaking in water, it is time to set auxiliary lines. In order to ensure that the surface of the tile after laying is flat and can maintain the horizontal and vertical, it is necessary to hang a vertical line on the leveling layer of the wall, and then set the horizontal line, so that the tile after laying is beautiful.

　　3. When tiling tiles, you need to set up supporting boards.

　　 When tiling tiles on the wall, you must use the horizontal line as the guideline, and then set up supporting boards. The reason for this is to avoid tiles. Dropping or displacement occurs before the adhesive strength is reached.

　　4. Tiling should be laid in order

　　 The above are all prerequisite work, and then the formal bricklaying. However, it is important to note that when laying tiles, we must follow the order in which they are laid. First, start paving the doors and windows, and then pave the tiles from bottom to top, from left to right. After the wall leveling layer is prepared, use a shovel to smear the cement mortar on the back of the tiles, and then stick the tiles directly on the wall. After the tiles are laid, be sure to tap the surface of the tiles lightly with a rubber hammer or shovel handle, so that the adhesion of the tiles will be stronger and there will be no falling off.

　　 After all these are completed, you can’t be careless, because you have to maintain and clean up, such as any cement marks on the tiles, which must be cleaned up in time, otherwise it will be difficult to make the cement dry. Get it off! If you want to know more related content, please continue to pay attention to this site! Finally, thank you for watching!