How to deal with beautiful seam tiles?

　　 I believe that many people will have troubles when decorating, that is, the beautiful seam of this tile does not know how to solve it. On the one hand, this beautiful seam will cost a lot of money, but if you don’t spend it, it will be for yourself. The overall effect of the house will have an impact, so it is the most practical to do it yourself. Let’s teach you the solutions to some of the problems encountered in this beautifully stitched tile, and I hope it can help you! (Beautiful seam tiles)

　　 first teach you how to deal with this beautiful gap between tiles

　　 1. You can use a utility knife to clean up the things in this gap For cleaning such finer things, be careful not to let the spatula touch the surface of the tiles. For tiles that have been filled, at least 3mm deep gaps must be cleared, and the edges of the tiles must be cleaned to prevent the edges of the tiles from turning black later.

　　2. After cleaning, you can use a brush to clean up the dust and impurities. Be careful when cleaning: do not brush the dust into the gap again.

　　3. In order to ensure that the gap is absolutely dust-free, you can use a vacuum cleaner to blow carefully against the tile gap to clean the gap again. After cleaning the tile gaps, use a vacuum cleaner to repeatedly vacuum and clean the tile gaps to ensure that the dust in the tiles is cleaned.

　　4. The last step is to use a semi-dry towel or sponge to wipe clean the dust on the gaps and sides of the tiles, so as to be truly clean and dust-free. After this work is completed, the following series of operations can be carried out!

　　 Then comes the highlight:

　　 1. First poke a hole in the mouth of the tile beauty grout bottle, then screw on the spout, and then use the wallpaper knife to cut the spout into 45 If the tile seam is less than 2 mm, the front end of the discharging nozzle can be cut out with a wallpaper knife; if the tile seam is larger than 2 mm, you can cut off a little more; the width of the discharging mouth should be smaller than the seam width to ensure No overflow;

　　2. Dip the sponge in water to quickly wipe the tile joints, and after confirming that there is no dust, use a glue gun to evenly hit the material in the tile joints, spread about 1 meter, and block the discharge nozzle;

　　3. Use the silicone plate to scrape the material immediately, a small amount of material overflows on both sides of the outdoor wood deck tiles joint, wipe it off with a slightly damp sponge, wipe it several times, and wash the sponge with water frequently;

　　4. Wait for an area to be done once, and then start a second time to ensure the quality of the construction;

　　 is probably such an operation, if you want to know more related content, please continue Follow our official website! Here are the most authoritative information and tile knowledge waiting for you to discover! Finally, thank you for watching! See you in the next issue! (Beautiful seam tiles)