How to choose tiles best?

First, identify the quality of the tiles from the appearance: whether the size is standard is the key to judging the quality of the tiles. Use a tape measure or caliper to measure the diagonal and four sides of the tiles and whether the thickness is uniform. In terms of chromatic aberration, check a few pieces at random out of the box and compare them one by one. A slight difference is normal. (Different batches of tiles generally contain color difference. It is recommended to buy enough quantity at one time when buying.) There should be no cracks. The cracks on the tiles mainly include cracks in the lower layer of uranium and surface cracks. Generally, products with high quality are less likely to appear. phenomenon. The brick surface should be flat, without unevenness. Although the uranium layer of the outdoor wood deck tiles is bright, there are inclusions in the uranium layer or the uranium layer.

Secondly, the internal quality of the tiles. First look at the water absorption rate: drop a drop of water on the tiles to see how fast the water penetrates. Good tiles, water drops will roll on the tiles. Listen to the sound again: good ceramic tiles, the sound is crisp, indicating that the porcelain content is high. If the sound 'click' and the stubble is broken, it means that there are cracks in the outdoor wood deck tiles.

When decorating your home, you must buy ceramic tiles. There is also a certain knowledge of how to buy ceramic tiles that are value for money and have a good source. In general, the principles of buying ceramic tiles are: one look, two listening, three Dripping water, four feet measurement.

First, look at the appearance. The color of the tiles should be uniform, the surface finish and flatness should be good, the surroundings should be regular, and the picture should be intact. Take out four or five pieces from a box to investigate whether there are defects such as color difference, deformation, lack of edges and corners.

Second, listen to the sound. Tap with a hard object, the louder the sound, the higher the degree of porcelain and the better the quality. You can also clip a corner of the tile with your left thumb, index finger and middle finger and hang it down easily. Tap the middle and lower part of the tile with your right index finger.

Three, drip test. You can put the water droplets on the back of the tile to see how fast the water is moisturized after the water disperses. Generally speaking, the slower the water absorption, the greater the density of the tile; on the contrary, the faster the water absorption, the less the density, and the quality of its connotation is better than the former.

Four, ruler measurement. The higher the accuracy of the side length of the tiles, the better the effect after paving. Buying high-quality tiles is not only a simple construction, but also saves man-hours and auxiliary materials. Use a tape measure to measure whether there is any difference in the size and periphery of each tile, and the one with high accuracy is the top grade.

In addition, investigate its hardness. The ceramic tiles are top grade with outstanding hardness, strong resistance, and not easy to break.

Full body tile: This is a non-glazed porcelain tile with good slip resistance and abrasion resistance.

Polished tiles: The whole body tiles become polished tiles after being polished. The hardness of this kind of tiles is very high, so it is very wear-resistant.

Vitrified tile: This is a high-temperature fired porcelain tile, which is the hardest kind of all tiles. Sometimes when the polished tiles are scratched, the vitrified tiles are still intact. However, the price of this kind of brick is relatively high, so it is not necessary to use it in home decoration. Ceramic tiles can be divided into floor tiles, wall tiles, waistline tiles, etc. according to their functions.

There are many kinds of granite floor tiles flower samples, and there is a large selection of them. According to the pattern, they can be divided into outdoor ceramic tile, non-slip tiles, vitrified polished tiles, bleed polished tiles, etc. Although the titles are completely different, the processing The craftsmanship and composition are not much different. The common size of floor tiles is 400-600mm square format, and sometimes even large-format floor tiles of 1000×1000mm are used. Such standard floor tiles make the room luxurious. However, if large-format floor tiles are used for small-area rooms such as kitchens and bathrooms, they will inevitably have too much loss and are not economical. Therefore, special craft tiles of 300-400mm square should be used in kitchens, bathrooms and other spaces, such as non-slip tiles and wear-resistant porcelain floor tiles. Generally, the price of each granite floor tiles is between 2 and 10 yuan.

Wall tiles can be divided into vitrified wall tiles and printed wall tiles according to patterns. Common standards are mostly 200mm×200mm or 200mm×300mm. Now relatively new planning ideas also install high-quality 400mm×400mm floor tiles on the wall to form a seamless sense of harmony and comfort, but the cost is higher than that of ordinary wall tiles.

Culture stone is often used to decorate walls or floors in some rooms with characteristics and advocating natural style. It belongs to specially processed ceramic tiles, and its appearance is imitated by the height of natural rock. The crystals reflect light in peace, and the decoration in the interior has a sense of authenticity. Due to the special craftsmanship, its cost is high.