Soon after the shop floor tile, the surface is like received a foggy layer of ash, looks dirty, how to wash tile floor have no way to fully restore clean ceramic tile surface.
Gorgeous smooth floor tile, why into this appearance?
< / p> < p> for this kind of situation, is likely to be the root cause is the root cause of these five: < / p> < p> 1, the floor tile on the surface of the wax layer not removed before polishing brick factory, the manufacturer will usually do polishing wax fill out the small hole of the ceramic tile
surface, realize the floor tile 'more bright and clean and tidy' actual effect.
And in the process of logistics transportation and the operation of the shop is stuck, wax layer will be damaged or scratches on the surface of the ceramic tile, floor tile looks bleak.
The situation down, consumer groups can also first dewaxing again anew polishing wax, floor tile surface texture.
< / p> < p> 2, detergent chosen unreasonable cleaner with acid, alkali, corrosion floor tile different floor tile and smear is suitable for different detergents, if, use detergent, will seriously disrupt the tile surface.
Floor tile for corrosion too strong detergent was associated with a light layer, the floor tile on the surface with a sharp indentations, tactility not smooth texture, also special is very easy to get dirty.
< / p> < p> 3, ceramic glaze is changed.
If the bricks after wiping clean and neat, never the same perspective to the analysis, the ceramic tile surface smoothness is high, the floor tile is likely to be the root cause of foggy body ceramic glaze caused part of the chemical reaction, thus formed the 'white mist'.
There is usually no way to improve such case, only can change the bricks.
< / p> < p> 4, cleaning method is not reasonable.
Floor tile should pay special attention to when do cleaning can't seriously disrupt the glaze layer, using a soft brush gently cleaning.
With box cutters, the small sharp tools such as wire ball, pay special attention to, avoid scratch floor tile on the surface of enamel.
If waxing floor tile surface layer did not remove, use the detergent is likely to cause unreasonable detergent and wax layer cause reaction, into the white film.
< / p> < p> 5, stains from penetrating to the floor.
After cleaning the floor must be immediately wipe, could not let water mark the remaining on the outdoor ceramic tile
, otherwise stains from new to infiltrate the floor tile, floor tile is very easy to lose the pure and fresh and natural beauty.
seam filling agent after full filling do not wipe clean work, on the surface of the floor tile survival is also one of the root cause.
< / p> < p>
is a modern interlocking deck tiles widely used in interlocking patio tiles
industry. It also enhances the quality patio deck tiles value of the products.
Review Foshan Jiabang Garden Supplies Co.,Ltd.'s progress at regular intervals, so we can continue with the strategies that work well and change or eliminate the ones that don't give the results we are looking for.
By building an connection around JIABANG and catering specifically to the craft beer crowd, Foshan Jiabang Garden Supplies Co.,Ltd. was able to raise the capital and brand awareness needed to successfully break into the domestic market with a groundswell of support.