- Ceramic Deck Tiles
- Stone Deck Tiles
- Wood Deck Tiles
- Composite Deck Tile
- Plastic Deck Tile
- Rubber Deck Tiles
- Artificial Grass Deck Tiles
- Solar Light Deck Tile
- Aluminum Deck Tiles
- Plastic Mat
How to lay tiles
The proportion of tiles used in home decoration is very large, especially in the kitchen and bathroom areas. However, laying ceramic tiles is a technical job. Once it is not laid well, it is easy to hollow and fall off, which will affect the use and the overall appearance. So, how to lay tiles?
1, soaking the tiles
How to apply the tiles? Before applying the tiles, you must first clean the stains on the surface of the tiles, and then soak them in clean water. The soaking time should be at least 2 This is to make the tiles fully absorb moisture, so that the tiles will not absorb the moisture in the material when they are laid, and will not cause the material to be weakly pasted due to loss of water, resulting in falling off and hollowing.
2. Setting up auxiliary lines
After the tiles have fully absorbed the moisture, start to set up auxiliary lines. In order to ensure that the surface of the tile after laying is flat and can maintain the horizontal and vertical, it is necessary to hang a vertical line on the leveling layer of the wall, and then set the horizontal line, so that the tile after laying is beautiful.
3. Setting up support planks
When laying tiles on the wall, you must follow the horizontal line as the guideline, and then set up support planks. The reason for this is to prevent the tiles from not sticking. Falling or displacement occurs before the strength.
4. Pave and paste in order
After all the above work is ready, the next step is to lay the tiles. However, it is important to note that when laying tiles, we must follow the order in which they are laid. First, start paving the doors and windows, and then pave the tiles from bottom to top, from left to right. After the wall leveling layer is prepared, use a shovel to smear the cement mortar on the back of the tiles, and then stick the tiles directly on the wall. After the tiles are laid, be sure to tap the surface of the tiles lightly with a rubber hammer or shovel handle, so that the adhesion of the tiles will be stronger and there will be no falling off.
5. Cleaning and maintenance
After the tiles are laid, it is necessary to clean up some dust and stains on the surface of the tiles. If the stains on the surface of the tiles are difficult to clean, you can use a 10% concentration of dilute hydrochloric acid solution to clean them, and then clean them with water.
How to lay tiles is introduced here. If you want to know more, you can click on the decoration knowledge to learn more.
Foshan Jiabang Garden Supplies Co.,Ltd. highlighted the need to foster a human openness to technological innovation.
should only be created by the very best interlocking deck tiles companies with the training, experience and know how about what is expected of them.
Foshan Jiabang Garden Supplies Co.,Ltd. attach great importance to the quality of our products and R&D services.