What aspects should be paid attention to when laying tiles

　　The tile aspect is the problem we have to face, because we all know that tiles must be laid after they are bought, so we still need to have a certain understanding of paving. The following editor will introduce what we should pay attention to when laying tiles. What aspects?

　　1. Appearance inspection　　1. Check whether the tile is laid in the correct direction and whether it is reversed.　　2. Whether the position of the tiles and waistline is correct, whether there is deviation or height error, etc.　　3. Check whether there are scratches or gaps. During the tile laying process, it is easy to scratch or damage the tiles due to careless construction. At the time of acceptance, it is necessary to check whether there are scratches or difficult-to-remove stains on the surface of the tiles, and whether there are cracks and corners on the surface of the tiles.　　 4. Check if there are cracks. Generally choose to check whether there are cracks or cracks on the outdoor wood deck tiles surface with eyes and hands under the condition of natural light during the day. A crack refers to the crack on the surface of the outdoor wood deck tiles surface, but the bottom of the tile is intact, and it has a slight hand-cut feeling when touched by hand; a crack refers to the crack of the whole brick surface from the surface to the bottom, and the hand feels obvious hand-cut.　　5. Check whether the gaps are even. In order to deal with the thermal expansion and contraction of tiles, and to ensure the straightness of the tile paving effect, a gap should be left between the tiles when paving the tiles. It is necessary to check whether the tile gap is uniform and beautiful during acceptance. Generally, the tile gap width is 1mm and cannot exceed 2mm. Special effects can also widen the gap, such as 5mm. In addition, check the tightness of the edges of the tiles.　　Second, hollowing rate check　　A big problem that tile paving is prone to is hollowing. If the tile hollowing phenomenon is serious, the wall tiles will easily fall off, and the floor tiles will cause noise and other phenomena. Therefore, when the decking tile is accepted, it is important to check whether the decking tile has hollow drum.　　 Tile hollowing inspection, you can use a small iron rod to strike each tile, and judge whether the tiles are hollowed or not by the sound of the striking. If the sound of percussion is dull, it means that the paving is firmer and firmer. On the contrary, if you make a clear sound of 'dong dongThe standard for tile hollowing is that the hollowing of floor tiles should be controlled within 3%, and no hollowing can occur on the main channel; the hollowing of wall tiles must be controlled within 5%. If it exceeds the standard, the paving workers can be asked to pry the bricks and resurfacing.　　Three, flatness and verticality inspection 　　1, verticality inspection. The walls of bathrooms and kitchens are usually covered with ceramic tiles. At this time, it is necessary to check whether the walls are horizontal and vertical. Let's first look at how to check the verticality of the tile facade. You can use the 2M ruler to check whether it is vertical, but the deviation cannot be accurately measured, while the 2M vertical detection ruler can detect the deviation value. Place the left side of the vertical detection ruler close to the measured surface, and then after the pointer stops swinging, read the scale value pointed by the pointer. This value is the verticality deviation of the measured surface, and each grid is 1mm. The verticality of the façade of the tiles is generally within 3mm.　　2, flatness detection. When testing the flatness of ceramic tiles, you can use a vertical inspection ruler, or use a 2M leaning ruler and a wedge feeler gauge. When using the latter method to detect, the side of the ruler is close to the surface to be measured, and the size of the gap is detected with a tapered feeler gauge. Three points should be tested at each place, namely one point vertically, and one point at each of the 45° left and right crossings at its original position, and the average of the three points should be taken. The flatness error of the tiles shall not exceed 2mm, and the height difference between adjacent tiles shall not exceed 0.5mm.　　 The aspects that should be paid attention to when laying tiles are introduced here. If you want to know more, you can click on the tile brand to learn more.