Leading decking tile manufacturer

since 2004

What are the reasons for the hollowing of ceramic tiles and floor tiles

by:JIABANG     2021-07-05
What are the reasons for the hollowing of ceramic tiles and floor tiles? When we are laying tiles, we will find that sometimes the tiles and floor tiles will hollow out, so today I will tell you what are the reasons for this phenomenon. 1. Use cement mortar with insufficient cohesive force to pave the tile floor tiles, or the proportion of cement mortar for paving tile floor tiles is improperly configured, or the cement mortar quality is poor, resulting in poor durability and forming a hollowing phenomenon. This hollowing phenomenon can easily make high-position tiles Falling, flat floor tiles hollowing out will cause water on the floor area or accumulation of debris, affecting the ground environment and finally causing the floor tiles to lift up and fall off. a: If the cement mortar contains too much moisture, the moisture will easily form some cavities during the drying process, so that the tiles or floor tiles cannot be well adhered to the surface of the base layer, resulting in hollowing; the water absorption rate of the tiles is too high or too low. It will cause the tiles to hollow and fall off; b: In order to save costs and cut corners, some construction workers only use cement mortar on the four corners of the tiles or floor tiles. Over time, the adhesion is not firm and the hollowing is caused; c: tiles and There is not enough gap between the tiles. After causing the environmental temperature change or thermal expansion and contraction, the tiles will squeeze each other and the hollowing phenomenon will appear; 2. The improper selection and use of tile glue will cause the hollowing of the tile and floor tiles: a: different tile glues indirectly affect their differences Condensation effect of tiles. Each kind of tile has a corresponding tile glue, so when choosing a tile glue, you should choose which kind of tile you are laying. Choose the appropriate tile glue according to the water absorption, size and function of the tile to stick different ones. Corresponding tiles, do not choose to use expired tile glue or mixed tile glue; b: The improper use of tile glue causes the emptying of tile and floor tiles. The main improper behaviors are as follows: 1) Put the tile glue in a bucket with water and place the tile glue on Manual mixing with a shovel on the ground and a shovel; 2) The use of a scraper of different sizes results in uneven thickness of the scraped tile glue glue, no glue on the back or insufficient bonding area, do not knead the tile and floor tiles hard, and it will not wipe. Well-proportioned, under-filled scraper will cause a series of problems: the edge position of the floor tiles is easy to hollow with the wall, the tiles will fall off in the long-term wet and cold natural environment, the floor tiles do not need to be kneaded, the glue is not stable, etc.; the above is the above. The editor has sorted out the reasons for the hollowing of the ceramic tiles and floor tiles, and hopes to bring you some help.
The single most important quality you'll need as Foshan Jiabang Garden Supplies Co.,Ltd. is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability.
For more information on interlocking patio tiles interlocking deck tiles and how to find the best quality at the right price, check out Jiabang Decking Tiles.
Depending on the scale of the service, Foshan Jiabang Garden Supplies Co.,Ltd. might also need to hire and manage an overseas workforce and comply with regulatory requirements.
Foshan Jiabang Garden Supplies Co.,Ltd. can promise you that we never conceded on the quality standards of our products.
If we avoid overselling interlocking deck tiles patio deck tiles and capabilities, you gain credibility and earn trust. We did not want to jeopardize our ingrained preference for humility.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...