What are the precautions for laying tiles
When we buy the tiles, we must pave the tiles. Our tile paving will have many problems. That is because we don't know what are the precautions for laying tiles? The following editor will briefly introduce it.
1. When we tiling tiles, we should pay attention to the concrete floor should be chiseled at the base layer, the depth of chiseling is 5-10 mm, and the spacing of chiseling marks is about 30 mm. After that, clean the floating ash, mortar, and oil stains, and brush the ground with water. 2. Next, let’s talk about the line before paving, but the datum line that is at right angles to the doorway pops up on the ground. The line should start from the doorway, so as to ensure that the entrance is a whole outdoor wood deck tiles, and the non-whole outdoor wood deck tiles is placed in the inner corner. Or under the furniture, the elastic line should pop out of the vertical and horizontal positioning control line. 3. Also, before laying ceramic floor tiles, we should soak the ceramic floor tiles in the shade. 4. Then again, when paving, the cement mortar should be applied to the back of the ceramic floor tiles, but after the paving, the rubber should be used to knock it firmly. At the same time, check the correction with a spirit level, and wipe the surface cement mortar. 5. Finally, 2~3 hours after paving, we use white cement to wipe the joints, and cement mortar with cement and sandu003d1:1 (volume ratio). The joints should be filled tightly and smoothly. Then wipe the surface clean with cotton thread. What are the precautions for laying tiles is introduced here, if you want to know more, you can click on the decoration knowledge to learn more.
Foshan Jiabang Garden Supplies Co.,Ltd. highlighted the need to foster a human openness to technological innovation.
Our vision is to realize the tremendous potential of interlocking deck tiles by providing patio deck tiles services that consistently meet our customers’ expectations.
Foshan Jiabang Garden Supplies Co.,Ltd. is the best manufacturer which has rich experience on manufacturing.