What are the methods for choosing bathroom tiles
The bathroom is a place with a lot of water, so you should pay attention to many aspects when buying tiles. After all, a fall in the bathroom is likely to cause accidents. So what are the methods for choosing bathroom tiles?
1. Choose tiles with low water absorption Generally speaking, high-quality tiles have low water absorption, so that they can dry quickly. If the tile does not indicate the water absorption rate, you can use tea or water droplets on the back of the tile. After a few minutes, observe the spread of the water droplets. The less water is absorbed, it means that the water absorption rate is low and the quality is better. Tiles with high water absorption rate will cause cracks on the surface of the tiles and peeling off of the entire wall and floor tiles after thermal expansion and contraction. The toilets in northern areas with four distinct seasons need to be paid more attention to this problem. 2. When choosing a tile with a high density , you can observe from the side whether the tile surface is flat and whether there are pinholes of uneven thickness. At the same time, you can tap the tiles to hear whether the sound is crisp. The crisper the sound, the higher the texture density and the better hardness of the tiles. When such tiles are laid in the bathroom space, they are not easily damaged, and are also easy to maintain and clean. 3. It is highly humid. Now it is recommended that the wall be covered with not only for aesthetics, but also to resist the erosion of moisture and protect the waterproof layer of the wall. 4. The floor tiles are made of non-slip texture. When we go to buy this, the merchant will generally remind us that the most recommended are matte or shallow convex-concave floor tiles. The reason is very simple: non-slip. During the decoration, we can pay attention to this. The general decoration team will do it. If you do not do it, you can supervise it. The floor of the bathroom should be 10-20 mm lower than the floor of other rooms. When laying tiles, consider the location and size of the floor drain. Otherwise, there will be gaps, and the laying of floor tiles usually retains 1% of the leakage slope, and the floor drain is the lowest to facilitate drainage. 5. Use different colors to distinguish dry and wet areas. If your home chooses dry and wet decoration: the shower area is separated from the toilet and basin area. A good division can be achieved through different decking tile materials and color varieties, so that the two do not interfere with each other, avoiding the embarrassment of splashing water and wiping after bathing. This is a relatively common decoration method abroad. To put it simply, the bathroom usually has relatively high humidity, and the requirements for tiles are waterproof, non-slip, and abrasion resistance. Bathroom floor tiles generally use full-body tiles, which have better anti-skid and abrasion resistance; bathroom wall tiles usually use outdoor ceramic tile, which have rich color patterns after glazed treatment and strong anti-fouling ability. What are the methods for selecting bathroom tiles are introduced here. If you want to know more, you can click on the decoration knowledge to learn more.
patio deck tiles interlocking deck tiles processes have been widely used to produce interlocking patio tiles such as patio deck tiles, interlocking patio tiles, and patio deck tiles etc.
Foshan Jiabang Garden Supplies Co.,Ltd. will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
Basically, you cannot have a interlocking patio tiles without having the right interlocking deck tiles. Since you are going to use it regularly, be sure to invest in one that has a high quality.
Foshan Jiabang Garden Supplies Co.,Ltd. employs a numbers of citizens, helping them and their families achieve a higher standard of living.