How to identify all-ceramic floor tiles
? The embryos of all-ceramic tiles are generally made of porcelain, that is, the entire tiles are all ceramized, that is, the clay embryos are finally out of the kiln under a certain pressure and temperature. What No water enters, and a layer of things on the back of the tiles can also prevent water seepage, so that the whole outdoor wood deck tiles does not enter the water. It is judged that all-ceramic tiles are classified according to the water absorption rate, and the water absorption rate is less than 0.5% for all-ceramic tiles. All-ceramic tiles have low water absorption, high density and high hardness, so they can only be used for filling and paving with the ground. If they are used as wall tiles, the water absorption is too low, and the cement is easy to stick. The all-ceramic granite floor tiles has a glazed surface, which is actually a layer of glass, which does not absorb water or dirt. The polished tile surface has fine pores on the surface after polishing, which is easy to absorb pollutants. The varieties of all-ceramic floor tiles can be divided into indoor tiles and outdoor tiles according to the paving position. Indoor floor tiles include: vitrified tiles, polished tiles, matt tiles, outdoor ceramic tile
, printed tiles, non-slip tiles, and special acid-proof floor tiles (used in laboratories and other corroded floors). Outdoor floor tiles include: square tiles and lawn tiles. As far as the tiles commonly used on the floor in home decoration are concerned, most of the floor tiles at present are all tiles. All-ceramic refers to tiles with a water absorption rate of less than 0.5%. This type of tile is soaked in water for a year. Basically it is equivalent to no water absorption. Therefore, in the process of using cement mortar, this kind of decking tile does not need to be soaked in water. All-ceramic floor tiles are commonly used in people’s lives, but many people are confused about how to choose real all-ceramic tiles. In fact, it is very easy to distinguish all-ceramic floor tiles. In general, The principle of buying ceramic tiles is: one look, two listening, three drops of water, four feet measurement. Take a look: (1) Look at the appearance, the surface color of all-ceramic floor tiles should be uniform, smooth, smooth, regular around, and free of chromatic aberration, deformation, lack of edges or corners and other defects. (2) Looking at the section, it is not all-ceramic that the section is clearly divided into two layers. (3) Look at the weight. All-ceramic tiles of general weight must be glaze when processed, so the tiles are heavier. If the tiles are lighter, they are not all-ceramic. Second listening: (1) To listen to the sound, tap with a hard object. The clearer the sound, the higher the degree of porcelain and the better the quality. (2) Use one hand to lift the edge or corner of the tile and hang it down easily. Tap the middle of the tile with the other hand to make a thick and long echoing tile (such as the sound of striking a copper bell) is made of all-ceramic glass. Ceramic tiles; if the sound is turbid and has no echo, or the echo is small and short, it indicates that the decking tile is poorly ceramized. The raw material particles of the decking tile are not uniform in size and the density is small. This type is an ordinary semi-porcelain tile. Three drops of water: Due to the low water absorption rate of all-ceramic floor tiles, turn the floor tiles in reverse and drip water on the back to see how fast the water spreads. Generally speaking, the slower the water absorption, the greater the density of the tile; on the contrary, the water absorption The faster the density, the sparser density, the better the inner quality of the former. Four-foot measurement: The higher the accuracy of the side length of the tiles, the better the effect after paving. Buying high-quality tiles is not only easy to construct, but also saves man-hours and auxiliary materials. Use a tape measure to measure whether there is any difference in the size and periphery of each tile. The one with high accuracy is the top grade. In addition, by observing its hardness, the ceramic tiles are top grade with good hardness, strong toughness and not easily broken. Scratch each other with the edges and corners of the fragments of the tiles, check whether the broken fragments are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or are scattered powder. If the former is the top grade, the latter is the quality. difference. When selecting bricks: 1. The sound is brittle when knocking is better than the sound is dull; 2. The two bricks can be closely contacted back to back and face to face to see if there is a phenomenon that there is no gap and too large to judge whether there is warping; 3. Find ink Apply it to the surface for an hour and then scrub to see if there are any traces. The ones without traces are good bricks, and those with infiltration are resolutely not selected; 4. Take two bricks to measure the geometrical length and width of the two bricks and look at the size of the bricks diagonally The products with no deviation are the high-quality products. Five. Open a pack of unopened bricks on site and compare the color difference with the samples. The ones with no color difference are the high-quality products. The bathroom and toilet are suitable for laying small size tiles.
Foshan Jiabang Garden Supplies Co.,Ltd. helps high-profile clients build strategic relationships that drive company growth, investments, funding and more. There are many make-or-break details involved in the day-to-day manufacturing within our company.
Are you interested in buying ? We also have all kinds of in offer. Visit Jiabang Decking Tiles
to know more and order, we have them at pocket friendly prices.
Foshan Jiabang Garden Supplies Co.,Ltd. always think about our customer first. To determine what the consumers would want out of their relationship on social, and work from there.