What are the differences between tiles and tiles
Porcelain generally refers to a thin-layer patch that is used on the surface of the wall or the ground. It is a type of interior wall tile with a smooth surface and belongs to the polished tile of the whole body tile category.
What is a ceramic tile?
The so-called ceramic tile is formed by grinding, mixing, pressing, glazing, and sintering refractory metal oxides and semi-metal oxides. An acid- and alkali-resistant porcelain or stone building or decorative material, which is always called a tiles' target='_blank'>decking tile. The raw materials are mostly mixed with clay, quartz sand, etc. Polished tiles and antique tiles are all ceramic tiles.
Porcelain refers to a thin-layer patch with a secondary surface for the wall surface. It is a kind of interior wall tile with a smooth surface and belongs to the whole body tile category. Polished outdoor wood deck tiles: It is a kind of bright outdoor wood deck tiles that the surface of the whole body brick body is polished, which is a kind of whole body outdoor wood deck tiles. Compared with full-body tiles, the surface of polished tiles is much smoother. Polished tiles are hard and wear-resistant, suitable for use in most indoor spaces except toilets and kitchens, such as balconies and exterior wall decorations. On the basis of the use of bleed-through technology, polished tiles can make a variety of imitation stone and wood effects. Antique tiles in the ceramic tile category: Antique tiles are not the product of my country's ceramic industry, but are imported from abroad. Antique tiles evolved from colored outdoor ceramic tile, which are essentially glazed porcelain tiles. Compared with ordinary glazed tiles, the difference is mainly manifested in the color of the glaze. Antique tiles are ordinary tiles and are basically the same as magnets. The so-called antique refers to the effect of bricks, which should be called antique effect tiles. Antique tiles are not difficult to clean. The only difference is that in the firing process, the technical content of the antique bricks is relatively high. After being pressed by thousands of tons of hydraulic press, it is sintered at a high temperature of 1000 degrees to make it high in strength and strong in wear resistance. It has been carefully developed Antique tiles have the characteristics of waterproof, non-slip and corrosion resistance.
Porcelain and ceramic tiles are two different concepts
The following analysis is made from three aspects:
1. Porcelain refers to the use of wall The surface has a thin layer of subsurface patches, while ceramic tiles refer to floor tiles with a porcelain surface. The most obvious difference between the two is the degree of thickness.
2. The smoother the tiles, the better, and the surface of tiles requires a certain degree of slip resistance. The best ceramic tile does not have a small amount of bubbles inside, otherwise it is easy to be frozen and broken, and the decking tile does not have high requirements for the existence of bubbles inside.
3. Porcelain slices should belong to whole-body ceramics, but not tiles, but slices; tiles are porcelain, which is made from porcelain clay.
are present in just about every facet of modern life.
Foshan Jiabang Garden Supplies Co.,Ltd. attaches great importance to customers and assists them in achieving their demands.
We sells interlocking deck tiles and focus on operational procedure and manufacturing facilities patio deck tiles.