What’s the water absorption of ceramic tile?According to the national testing standards for ceramic tiles, ceramic tiles are classified into porcelain tiles (water absorption E≤.5%), fine stoneware tiles (water absorption 3%≤E≤6%), stoneware tiles (water absorption 6%≤E≤10%), ceramic tiles (water absorption rate above 10%), etc. The inspection method should be tested by pouring water on the back of the brick body.The water absorption rate of ceramic tiles is related to the breaking strength, abrasion resistance and gloss performance. Generally speaking, the lower the water absorption rate of the ceramic tile, the better the ceramic tile, the correspondingly higher product strength, better wear resistance and gloss performance, and the product is less likely to crack or peel off. The tiles with high water absorption rate will cause cracks on the surface of the tiles and peeling off of the overall tiles after thermal expansion and contraction. This is especially important when choosing tiles for bathroom tiles. There is also a simple method to judge the water absorption rate. The water absorption rate is also called the water seepage rate. The simplest test method is to drop some water on the tiles to do an experiment. After a few minutes, wipe off the water marks on the surface of the tiles. If nothing remains Traces prove that the water absorption rate of the tiles is very low. If there are water marks on the tiles, the water absorption rate of the tiles is high. The ceramic series of click clack deck tiles, use the ceramic tile with low water absorption. The tile body has high stability, is not easy to break, and is more durable. The high-quality ceramic tiles are equipped with a new PE material base, which is convenient for installation. It is the preferred floor for outdoor places such as gardens, terraces, and balconies.

How to maintain outdoor solid wood floor?    Generally, many places outside of us will be exposed to the sun for a long time, so before we decorate the wooden floor outdoors, we must first choose some places that are dry and humid in the external environment. After construction and installation using wood with a large water content, large deformation and cracking will occur. Use the existing size of outdoor solid wood flooring as much as possible. If on-site processing is required, all cuts and holes should be fully painted with corresponding preservatives to ensure the service life of outdoor solid wood flooring.  It is best to use galvanized or stainless steel for the connection of wooden floors, which can prevent rust corrosion. In the process of installation and perforation, you should first drill with an electric drill. Then fix it with screws to avoid artificial cracking of the outdoor solid wood floor. Click clack solid wood flooring uses galvanized screws or stainless steel screws to fix the wood on the new PE plastic base, which is easy to install and does not require drilling. Very suitable for use in various outdoor places of house.

Analysis of common issues in the use of wood plastic composite flooring (WPC floor)1.FadingA generation of wood plastic composite (WPC) products will add organic toners in the processing engineering to make the apparent color richer; in the actual application process, wood-plastic materials and their products generally have a slight fading. The degree of fading and the speed of fading mainly depend on: ①The quality of the toner; ②The matching degree of the carrier material (HDPE plastic, plant fiber) and the toner. For example, the lighter the color of plant fiber and HDPE plastic is, the better. The second-generation co-extrusion wood-plastic products are more durable than ordinary wood-plastic products, because the surface materials are chemically modified or the surface materials are directly replaced with special engineering plastics such as PE5000S or sarin resin. The degree of fading in a year is less than 4°, that is, it is invisible to the naked eye.2.CrackingThe cracking of wood-plastic products must be a quality problem of wood-plastic products under the removal of human factors. Generally speaking, the cracking of wood-plastic products has the following reasons: ①The production speed is too fast; ②The extrusion process is not enough; ③The ratio of coupling agent used is too low or not added at all; ④The proportion of plant fiber is too high.3.Bending1）The reason of WPC products bended when they are not installed: ① process quality control is ignored during the production process; ② unreasonable stacking.2）The reason for Wood-plastic floor bended after installation: ① non-professional installation or installation and use not in accordance with standard installation methods; ② cutting corners. 3. Hollow plastic wood is easier to deform than solid wood.The surface hardness of the first-generation wood plastic composite products is insufficient and scratches are easy to occur. In this case, only sandpaper is required. The second-generation co-extruded WPC products are more wear-resistant and harder than the first-generation wood-plastic products. So there is no need to worry about wear.

Outdoor tile is a kind of product that can be seen everywhere in our life. Outdoor tile has been widely used in our life, making great contributions to our life. It needs to pay attention to all aspects in building outdoor tiles. Next, learn how to paste outdoor tiles together with Jiabang Outdoor tile Suppliers.How to pave outdoor tiles1. Find out the colors and patterns of outdoor tiles according to the design drawings or requirements. Select flawed outdoor tiles. So as to prepare for the work ahead of time.2. After arriving, we need to arrange and categorize them, and remember to put them in a safe place to avoid damage.3. Soak before laying, lest the absorption rate of outdoor tile causes water in cement to be absorbed and tighten and crack.4. The ground needs to be wet with a spoon or pipe. For this job, reduce dust. It also lets the ground absorb some of the water. There will be no water shortage.5. Next, the cement pad is stirred. The volume ratio of laying outdoor tile cement sand is about 1:5, sprinkling water and stirring evenly, and the thickness is about 3cm. Combined layer and outdoor tile should be piecewise paving at the same time, paving timely use cement slurry or dry paving mud sprinkler for bonding.After you touch the cement oil, you should use the glue hammer to beat it slowly to reach the standard of the level. Remember, cement oil must be smooth, otherwise easy future outdoor tile empty drum.The surface of the surface layer shall be cleaned, smooth and solid with water cloth within half an hour after sticking; The width of the seam between porcelain plates should meet the design requirements. The width of the seam should not be more than 2mm. Unless there is a design requirement. Archaize brick considers additionally.Cautions for Building Outdoor Tile:1: When applying outdoor tiles, the cement should be filled a little, and the amount of cement on all sides of the surface should be the same, so as to ensure that the pasted outdoor tiles will stick firmly and no empty drums will occur. Once finished, tap outdoor tile on the surface with a special hammer to test for empty drums.2. Make sure that the tiles are flat and correct: After being pasted, experienced teachers will pound Outdoor tiles with plastic hammer to timely control the surface flatness of tiles. Otherwise, it will be too late to adjust when the cement is dry. Error: did not pay attention to adjust in time, bring about of the shop not level off enough, edge place is a little bit taller, get shower room also had to follow "be out of shape"!Vertical measurement is correct: every few tiles should be measured carefully to ensure that all tiles stick to the wall like a large piece of glass. Mistake: This was too obvious for some poor craftsmen. Outdoor tile's cracks were too far apart. It is estimated that the tiles were pasted when they were brought, and there was no observation on outdoor tile's size and appearance.Correct: After the tiles are pasted, the outer edges and walls of the tiles are filled with cement, and the tiles are also glued more firmly. Mistake: Compared with the previous one, the master mason of this house was too careless! The edge and wall must not have been filled with cement, so it accidentally bumped and a small piece of outdoor tile fell off the edge!For more information about outdoor ceramic tile, you are welcome to contact Jiabang Outdoor tile Suppliers.