< / p > < p > a lot of people want to save money sometimes ceramic tile, will be thinking about a lot of people don't, it won't do, that we ShuiTie ceramic tile tips for today.
< / p > < p > < / p > < p > 1, the ceramic tile shop sticks before soaked with water.
Will first after primary of ceramic tile the reverse side is clean, and flooded more than 2 hours.
Flooding is for the purpose of the ceramic tile full moisture absorption in advance, so as not to siphon off after the shop is stuck adhesive material moisture, affect the bonding strength or shrink bonding material too empty drum, debonding, etc.
after flooding, in front of the shop is stuck out from the water, and use cotton cloth to wipe the surface water or surface water can only be carried out after the shop is stuck to dry.
< / p > < p > < / p > < p > 2, ceramic tile hanging vertical before the shop is stuck.
Before the shop is stuck should also commit suicide by hanging vertical leveling layer in metope, in order to determine the out wall of ceramic tile lines, and horizontal line, this is can do smooth when the shop is stuck, and can do horizontal flat vertical ceramic tile.
< / p > < p > < / p > < p > 3, set up a wooden plate.
Shop sticks ceramic tile should be based on a horizontal line, set up the wooden plate of ceramic tile supporting role.
Its purpose is to prevent ceramic tile before bonding material not hardening build strength drop or shift.
< / p > < p > 4, ceramic tile generally start with Windows and doors.
Shop sticks ceramic tile general since Yang Angle or Windows and doors, according to the bottom-up, from left to right order.
Method of the shop is stuck is that the first water wetting screed-coat, with gray shovel to wipe on the underside of the ceramic tile with good adhesive materials, then stick on the wall tile, shovel wood handle with ashes or rubber hammer tapping ceramic tile, the bonding material packed with metope ceramic tile, the gap between the attention to the above ceramic tile.
Mouth with horizontal alignment, uneven, you can at the bottom of the ceramic tile mat small pieces.
Stick the rule should be used after a row of horizontal, leveling, will be higher than the ceramic tile of hammer out, to get off the ceramic tile of dents add paste to paste.
Bonding material shoulds not be too thick, otherwise it is not easy to spread out, at the same time also shoulds not be too thin, tile paste can't fixed, easy to fall down.
< / p > < p > < / p > < p > 5, 10% diluted hydrochloric acid scrubbing surface available.
According to the glazed brick wall surface pollution, available 10% diluted hydrochloric acid scrubbing solution or water surface.
If clean with dilute hydrochloric acid solution, should be thoroughly with tap water rinse again.
Here to remind is, metope stick Yang Yang Angle should be laid on the Angle of the ceramic tile, the shade shade in principle should also be the shop is stuck ceramic tile, in order to make the corner form the circular arc form is beautiful.
But now people for the sake of convenience, to Yang Angle generally USES ceramic tile directly touch Angle processing, internal Angle generally do not do any processing.
Glazed ceramic tile shop sticks and clean finished, if the above spray a thin layer of be brightener, and soft cloth to try it again, and again the surface is bright and not easily contaminated.
< / p > < p > < / p > < p > 6, outdoor ceramic tile
aperture of excess material should shave clean shop sticks ceramic tile, ceramic tile seam should be timely in excess of adhesive material scraping clean, with a wet cotton cloth to wipe the stains out of brick, don't wait until the bonding material of dry wipe again after cleaning, it not only can not clean, if shaving with good thing and will damage the glaze layer.
After bonding materials such as coagulation, can use white cement, gypsum mortar or paste will joint brush again, with cotton yarn will brush divide evenly mortar, filled.
< / p > < p >
To that end, Foshan Jiabang Garden Supplies Co.,Ltd. has successfully built a solid foundation and infrastructure for interlocking deck tiles manufacturing.
No, this isn't a wonder product and it won't be likely to change your life but it will give your interlocking patio tiles a kick and bring the extraordinary to the every day. give it a shot at Jiabang Deck Tiles.
We attach a great importance to domestic market and knows the importance factors of manufacturing interlocking deck tiles, such as producing methods, etc.